Accessories
Decking screws
Hover over the image above for a detailed view
Spax Wirox C4 decking screws
T20 T-star driver bit included. Serrations on lower thread for quick and safe fastening. Non-threaded shank allows the two materials to be pulled tightly together. Upper thread locks the deck board securely. No pre-drilling required but recommended for hardwoods.
C4 Accredited: 15 Years without Corrosion
Size: 4.5mm x 60mm
Pack of 250 at £22.27 +vat
Pack of 500 at £34.36 +vat
End grain preservative
Hover over the image above for a detailed view
ENSELE end grain treatment
ENSELETM is a waterbased, end-grain preservative based on copper/triazole technology specifically designed for use with TANALISEDTM timber.
Whenever Gripsure decking boards are cross-cut, notched or bored on-site, the exposed surfaces must be re-treated with ENSELETM end-grain preservative to maintain the integrity of the protective system.
Brush-on, end-grain timber preservative for the retreatment of cross-cut, notched or bored TANALISEDTM timber
Maintains the integrity of the treated timber against fungal and insect attack
Easy to apply
Green colour finish
1L can £14.99 +vat
5L can £37.99 +vat
Stehle Diamond Disk Blade
Cuts through the non slip hardened aggregate and timber board
Hover over the image above for a detailed view
Gripsure recommend using Stehle 250mm x 30mm bore Z=16 2.2mm width polycrystalline diamond disk blades to cut through our aggregate based non slip decking products
-
Cuts through aggregate and timber board
-
Good for over 1,000 cuts
-
No need to keep changing blades
-
No need for an angle grinder
Available from Gripsure for £99.99+vat
All cut ends need to be treated with an end grain preservative
